Color Block 2 User Manual 11 V1.1 September 2012
Mode 1:
Ch1 – Grouping, variable grouping facility to run FX / within groups
Ch2 – Colour Speed, variable speed of colour scrolling
Ch3 – Colour Fan, variable fan of colour between / within groups
Ch4 – Colour Range, variable limit of spectrum range for colour scrolling
Ch5 – Colour Step, variable control of smoothness of colour scrolling
Ch6 – Intensity Effects, wide selection of intensity fading and snapping effects
Ch7 – Intensity Fan, variable fan of intensity effects
Mode 4 and 7:
Ch1 – Colour Speed, variable speed of colour scrolling
Ch2 – Colour Fan, variable fan of colour between / within groups
Ch3 – Colour Range, variable limit of spectrum range for colour scrolling
Ch4 – Colour Step, variable control of smoothness of colour scrolling
Ch5 – Intensity Effects, wide selection of intensity fading and snapping effects
Ch6 – Intensity Fan, variable fan of intensity effects
All internal FX are referenced back to the group base HSI colour and intensity levels.
* Magic Amber is the term used for the unit's ability to bring in Amber when mixing colors that require it.
3. Troubleshooting
Troubleshooting is a process of elimination. First, rule out the other field factors (i.e. bad connections, faulty cables and
power supplies). For technical advice and/or parts, please contact your selling dealer or the offices listed in this manual.
Symptom Possible Cause Solution
Fixture does not respond to DMX control. PSU set to wrong or different DMX
address.
Bad cable connecting DMX control
and PSU.
Bad cable connecting PSU and the
fixture.
Bad in/thru connection between
adjacent fixtures.
Fan not working.
Check DMX address and Mode
settings.
Check/replace DMX run from the
console.
Check/replace cable from PSU to
fixture or in/thru connections.
Call selling dealer if fan is not
working.
Intensity levels of LED are fluctuating. Signal deterioration, cable lengths
connecting adjacent fixtures are too
long.
Check the cable length and
configuration.
Fixture does not respond to DMX control but
PSU and all cable connection are good.
Electronics fault in the fixture unit. Call selling dealer.
Noise from fixture unit. Fan malfunction. Check fan and call selling dealer.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales